Round Tapered Steel Pole

Pole Shaft

• Fabricated from coil stock, weldable grade, hot rolled commercial

quality structural steel tube which has a wall thickness of 11 gauge or

7 gauge. Shaft conforms to ASTM specifications. Meets or exceeds

minimum yield strength of 55,000 PSI. Shaft is furnished with ground

lug inside pole, opposite hand hole opening.

Base Plate

• Fabricated from structural quality hot rolled steel. Meets or exceeds

minimum yield strength of 36,000 PSI. Base is circumferentially

welded to pole shaft. Bolt holes slotted to provide 1” flexibility on either

side of bolt circle. Consult factory for pole base templates.

• Base templates provided with order. Do not pre-pour.

Base Cover

• Die-formed from heavy gauge quality aluminum. Two piece cover

for easy installation. Square base cover is standard, round base

cover is optional.

Pole Cap

• Color-impregnated polymer snap-to-close pole cap provided in black.

Finish

• All poles are shot-blasted and cleaned to a near-white finish prior

to painting. A Quali-Guard® textured thermoset polyester powder

coat is then applied to a minimum of 3 mils and then oven-baked at

a temperature of 400 ºF to promote exceptional adherence and

finish hardness. Optional Zinc-Rich Primer - Recommended within

three miles of the ocean. Pole finish is warranted for a full two (2)

years. An optional five (5) year extended warranty is also available

(external primer coat and internal rust inhibiting coating).
Anchor Bolts

• Poles are provided with hot-dip galvanized anchor bolts, with a “J”

bend on one end and two flat hex bolts end and two flat washers per

bolt. Anchor bolts meet or exceed a minimum of 36,000 PSI. Anchor

bolts conform to ASTM F1554 grade 36 and are provided.

RTSP